CNC X & Y 0-Point finder camera (For side/flange mount)

CNC Laser Systems

CNC X & Y 0-Point finder camera (For side/flange mount)

Find your X & Y zero point coordinates quickly, easily and high accuracy.

CNC X & Y Camera is easily mounted on your CNC machine. It can be screwed, from the top or below or use a DIY bracket of your choice.  Use the two pads of Velcro to find the optimum point before mounting it with screws.
The CNC X & Y camera comes fully assembled and ground-adjusted, just mount it on your CNC as level as possible. The better the levelling the easier the end adjustment is.

The set consists of an 8mm Endoscope camera with 8 LEDs and 3-meter cable with USB connector.
Camera body with a sphere for holding the Endoscope camera for junction adjustment. The top screw keeps the endoscope camera in position after levelling. Just loosing the screw, turn the camera on in your CNC software, turn the camera until you have the linearity you want, tighten the screw and you are ready to get the offset date. Just follow the simple instructions.

2 pcs. 5mm x 35mm screws.
1 pcs. 4mm Springloaded plunger.
2 pcs. Velcro / 3M self-adhesive mounting pads.

1 Hex key
A USB connection to PC.

Works with WinPC-NC, Mach3 / 4, UCCNC, LinuxCNC and all other programs that control CNC machines and have integrated Camera software.
CNC Laser Systems with Per Bekker-Madsen as the Inventor has applied for a patent for this product and its feature.

Sales over
CNC Laser Systems
A Bekker-Madsen Company
Zwängiweg 2
8134 Adliswil
Switzerland

Phone +41 (0) 78 686 84 87
pbm@cnc-laser-systems.com